Rear Suspension

Anti-roll bar, 4WD

To remove

1. Raise the car.
2. Remove the bolts (A) for the anti-roll bar (B).





3. Remove the bolts (C) for the anti-roll bar.





4. Lift down the anti-roll bar.

To fit

1. Lift up the anti-roll bar.

Tightening torque 30 Nm (23 lbf ft )

2. Fit the bolts (A) for the anti-roll bar (B).





3. Fit the bolts (C) for the anti-roll bar.

Tightening torque 30 Nm (23 lbf ft )





4. Lower the car to the floor.