Restricted Exhaust

Restricted Exhaust

Special Tools

EN 35314-A Exhaust Back Pressure Gauge.

For equivalent regional tools, refer to Special Tools.

Diagnostic Aids

Refer to Hot Exhaust System Warning.

For dual exhaust systems a quick check of exhaust flow will help determine which side of the exhaust system is restricted. The side that has less exhaust flow is the side that will be suspect, and diagnosis should begin there.

Test Description

The numbers below refer to the step numbers on the diagnostic table.

4

The exhaust system has very low back pressure under normal conditions. If the exhaust system is restricted, a significant increase in the exhaust pressure is noticed on the EN 35314-A gauge.

Removing the HO2S sensor may set a DTC. When finishing this diagnostic table, be sure to clear all codes.

5

This step will isolate the catalytic converter from the remainder of the exhaust system.

8

Confirming that the condition has been fixed is essential. If the symptom still exists and the vehicle has a dual exhaust system, proceed to step 2 and repeat diagnostic procedure on the opposite exhaust pipe.