Connecting Rod, Engine

Connecting Rod Bolts
First pass 30 Nm (22 lb ft)
Second pass Loosen until torque reading is zero
Third pass 25 Nm (18 lb ft)
Final Pass Tighten an additional 110°

Connecting Rod Side Clearance 0.095-0.355 mm (0.0037-0.0140 in)

Connecting Rod Bore Diameter - Bearing End 59.620-59.636 mm (2.3472-2.3479 in)
Connecting Rod Bore Diameter - Pin End - Production 24.009-24.019 mm (0.9452-0.9456 in)
Connecting Rod Bore Diameter - Pin End - Service Maximum 24.007 mm (0.9457 in)