Engine Support Fixture (Centering Adapter)

Engine Support Fixture (Centering Adapter)

Special Tools

- CH-904 Base Frame
- CH-49289 Centering Adapter
- CH-49289-1 Frame
- CH-49289-2 Safety
- CH-49289-3 Safety
- CH-49289-4 Support Right
- CH-49289-5 Support Left
- CH-49289-6 Centering Pin
- CH-49289-7 Arm Right
- CH-49289-8 Rod Right
- CH-49289-9 Arm Left
- CH-49289-10 Rod Left
- CH-49289-11 Adapter
- CH-49289-12 Adapter
- CH-49289-13 Adapter
- CH-49289-14 Support
- CH-49290 Mounting Engine/Gearbox

For equivalent regional tools, refer to Special Tools.

Installation Procedure

1. Install the CH-904 base frame (1) to the hydraulic lift. The distance (A) has to be 40 mm (1.6 in).





2. Install the CH-49289-2 safety (2) and CH-49289-3 safety (3) into the CH-49289 centering adapter (1).





3. Install the CH-49289 centering adapter to the CH-904 base frame.
4. Install the CH-49289-4 support right (1) to position "01".





5. Install the CH-49289-5 support left (2) to position "02".
6. Install the CH-49289-7 arm right (1) to position "04".





7. Install the CH-49289-9 arm left (2) to position "06".
8. Install the CH-49289-11 adapter (1) to position "08".





9. Install the CH-49289-11 adapter (2) to position "09".
10. Install the CH-49289-12 adapter (1) to position "15".





11. Install the CH-49289-12 adapter (2) to position "18".
12. Install the CH-49289-13 adapter (1) to position "19".





13. Install the CH-49289-13 adapter (2) to position "22".
14. Install the CH-49289-6 (1)centering pin into CH-49289-4 support right (2) to position "B".





15. Install the CH-49289-6centering pin (3) into CH-49289-5 (4) to position "E".

16. Note
For the removal of front suspension frame and/or engine and transmission, lower and secure CH-49289-8 rod right and CH-49289-10 rod left.

Install the CH-49289-8rod right (1) into CH-49289-7 arm right (2) to position "H".





17. Install the CH-49289-10 rod left (3) into CH-49289-9 arm left (4) to position "M".
18. Install both CH-49289-14 support (1) into both CH-49289-11 adapter (2).





19. Install both CH-49289-14 support (3) into both CH-49289-12 adapter (4).
20. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
21. Installation in conjunction with CH-49290 mounting engine: Remove both CH-49290-6 pin (1) from the CH-49290 mounting engine/gearbox (2).





22. Note
Do NOT raise the vehicle with the hydraulic lift.

Do NOT lower the vehicle.

Raise the hydraulic lift with CH-49289 centering adapter (2) to support the front suspension frame (1).





23. Install the CH-49289 centering adapter parallel to the front suspension frame.

Removal Procedure

1. Remove the CH-49289 centering adapter (2) from the front suspension frame (1).





2. Lower the hydraulic lift with CH-49289 centering adapter.
3. Remove the CH-49289 centering adapter from the CH-904 base frame.