Connecting Rod, Engine

Connecting Rod Bolts
First pass 30 Nm (22 lb ft)
Second pass Loosen until torque reading is zero
Third pass 25 Nm (18 lb ft)
Final Pass Tighten an additional 110°

Connecting Rod Side Clearance 0.095-0.355 mm (0.0037-0.0140 in)

Connecting Rod Bore Diameter - Pin End 24.007-24.021 mm (0.9452-0.9457 in)
Connecting Rod Bore Diameter - Bearing End 59.620-59.636 mm (2.347233-2.3479 in)