Engine Front Cover Assemble
Engine Front Cover AssembleSpecial Tools
- EN-29184 Oil Seal Installer
- EN 46103 Camshaft Actuator Valve Seal Installer
For equivalent regional tools, refer to Special Tools.
1. Important
Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.
Install the NEW crankshaft front oil seal into the engine front cover using the EN 29184 installer.
2. Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.
3. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN 46103 installer.