Automatic Transmission Flex Plate Installation

Automatic Transmission Flex Plate Installation

Special Tools

- EN 46106 Flywheel Holding Tool
- EN 45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools.

1. Install the automatic transmission flex plate (2).





2. Loosely install the NEW 8 automatic transmission flex plate bolts (1).
3. Install the EN 46106 holder.





4. Tighten the 8 automatic transmission flex plate bolts (1) to 30 Nm (22 lb ft).





5. Tighten the NEW 8 automatic transmission flex plate bolts an additional 45 degrees using the EN 45059 kit.
6. Remove the EN 46106 holder.