Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2011 >> 9-5 FWD (9650) L4-2.0L Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Removal and Replacement >> Engine Support Fixture (Mounting Engine/Transmission)

Engine Support Fixture (Mounting Engine/Transmission)

Engine Support Fixture (Mounting Engine/Transmission)

Special Tools

- CH-904 Base Frame
- CH-49290 Mounting Engine/Transmission
- CH-49290-4 Right Pin Bracket
- CH-49290-5 Left Pin Bracket
- CH-49290-6 Pin
- CH-49290-7 Adapter Plate
- CH-49290-8 Adapter Plate
- CH-49290-9 Front Mounting Bracket Left
- CH-49290-10 Rear Mounting Bracket Right
- CH-49290-11 Rear Mounting Bracket Left
- CH-49290-12 Adapter Plate
- CH-49290-14 Supporting Stand
- CH-49290-15 Adapter Plate
- CH-49290-16 Supporting Stand
- CH-49290-17 Supporting Stand
- CH-49290-18 Supporting Stand

Installation Procedure

1. Install the CH-904 base frame (1) to the hydraulic lift. The distance (A) has to be 40 mm (1.6 in).





2. Install the CH-49290 mounting engine/transmission (1) to the CH-904 base frame (2).





3. Install the CH-49290-4 right pin bracket (1) with CH-49290-6 pin (3) to the CH-49290 mounting engine/transmission.





4. Install the CH-49290-5 left pin bracket (2) with CH-49290-6 pin (3) to the CH-49290 mounting engine/transmission.
5. Vehicles with AWD: Install the CH-49290-17 supporting stand (1) to the CH-49290 mounting engine/transmission. Lower the CH-49290-17 supporting stand.





6. Vehicles with FWD: Install the CH-49290-15 adapter plate (1) to the CH-49290 mounting engine/transmission. Position "X" of the CH-49290-15 adapter plate to "20" of the CH-49290 mounting engine/transmission.





7. Vehicles with FWD: Install the CH-49290-16 supporting stand (2) to "24" of the CH-49290-15 adapter plate. Lower the CH-49290-16 supporting stand.
8. Install the CH-49290-12 adapter plate (1) to the CH-49290 mounting engine/transmission. Position "Q" of the CH-49290-12 adapter plate to "13" of the CH-49290 mounting engine/transmission.





9. Install the CH-49290-14 supporting stand (2) to CH-49290-12 adapter plate. Position "U" of the CH-49290-14 supporting stand to "16" of the CH-49290-12 adapter plate. Lower the CH-49290-14 supporting stand.
10. Raise and support the vehicle.

11. Note
Do NOT raise the vehicle with the hydraulic lift.
Do NOT lower the vehicle.

Raise the hydraulic lift with CH-49290 mounting engine/transmission.





12. Install both CH-49290-6 pin (2) into the front suspension frame (1).
13. Install the CH-49290-8 front mounting bracket right (1) with CH-49290-7 adapter plate (2) to CH-49290 mounting engine/transmission and the front suspension frame. Position "G" of the CH-49290-8 front mounting bracket right to "03" and "04" of the CH-49290 mounting engine/transmission. Tighten the fasteners.





14. Install the CH-49290-9 front mounting bracket left (1) with CH-49290-7 adapter plate (2) to CH-49290 mounting engine/transmission and the front suspension frame. Position "H" of the CH-49290-9 front mounting bracket left to "05" and "06" of the CH-49290 mounting engine/transmission. Tighten the fasteners.





15. Install the CH-49290-10 rear mounting bracket right (1) to CH-49290 mounting engine/transmission and the front suspension frame. Position "K" of the CH-49290-10 rear mounting bracket right to "07" and "08" of the CH-49290 mounting engine/transmission. Tighten the fasteners.





16. Install the CH-49290-11 rear mounting bracket left (1) to CH-49290 mounting engine/transmission and the front suspension frame. Position "N" of the CH-49290-11 rear mounting bracket left to "10" and "11" of the CH-49290 mounting engine/transmission. Tighten the fasteners.





17. Install the CH-49290-14 supporting stand (2) to the transmission front mount (1).





18. Vehicles with AWD: Install the CH-49290-17 supporting stand (1) to the transfer case (2).





19. Vehicles with FWD: Install the CH-49290-16 supporting stand (1) to the transmission rear mount (2).





20. Install the CH-49290-18 supporting stand (1) to CH-49290 mounting engine/transmission to support the engine oil pan.





21. Lower and remove the CH-904 base frame with the hydraulic lift from the CH-49290 mounting engine/transmission.

Removal Procedure

1. Raise and install the CH-904 base frame with the hydraulic lift to the CH-49290 mounting engine/transmission.
2. Remove the CH-49290-18 supporting stand (1) from the engine oil pan.





3. Vehicles with FWD: Remove the CH-49290-16 supporting stand (1) from the transmission rear mount (2).





4. Vehicles with AWD: Remove the CH-49290-17 supporting stand (1) from the transfer case (2).





5. Remove the CH-49290-14 supporting stand (2) from the transmission front mount (1).





6. Remove the CH-49290-11 rear mounting bracket left (1).





7. Remove the CH-49290-10 rear mounting bracket right (1).





8. Remove the CH-49290-9 front mounting bracket left (1) with CH-49290-7 adapter plate (2).





9. Remove the CH-49290-8 front mounting bracket right (1) with CH-49290-7 adapter plate (2).





10. Lower the hydraulic lift with CH-49290 mounting engine/transmission.
11. Remove the CH-49290 mounting engine/transmission (1) from the CH-904 base frame (2).




pro multis · About Operation CHARM