Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake
Camshaft Position Actuator Replacement - Bank 1 (Right Side) IntakeRemoval Procedure
1. Remove the right exhaust camshaft actuator.
2. Remove the intake camshaft position actuator fastener (1).
3. Remove the right intake camshaft position actuator (2).
Installation Procedure
1. Locate the intake camshaft position actuator to the camshaft and loosely install the fastener.
2. Refer to Torque Reaction Against Timing Drive Chain Caution.
Note
Use an open-end wrench at the camshaft hex to prevent camshaft/crankshaft rotation.
Tighten the camshaft position actuator fastener.
3. Install the right exhaust camshaft actuator (2).