System Specifications
| Ball Stud-to-Knuckle Nut | see note Tighten the nut to 60 Nm (44 ft lbs) for a ball stud with silver cup bottom or 40 Nm (30 ft lbs) for a ball stud with black cup bottom. |
| Rear Axle Upper Control Arm-to-Frame Bolt | 81 Ft.Lbs. |
| Jounce Bumper Nut | 46 Ft. lbs. |
| Lower Control Arm-to-Knuckle Fastener | 81 Ft. lbs. |
| Lower Control Arm Rear Bushing Nut | 85 Ft. lbs. |
| Lower Control Arm-to-Frame Front Bolt and Nut | 89 Ft. lbs. |
| Lower Control Arm-to-Frame Rear Bolts and Nuts | 52 Ft. lbs. |
| Upper Control Arm-to-Knuckle Bolt | 118 Ft. lbs. |
| Upper Control Arm-to-Rear Knuckle Bolt | 118 Ft. lbs. |
| Ball Stud-to-Control Arm Bolts and Nuts | 50 Ft. lbs. |
| Front Control Arm-to-Frame Bolt and Nut | 89 Ft. lbs. |
| Lower Control Arm-to-Frame Rear Bolts and Nuts | 52 Ft. lbs. |
| Lower Control Arm-to-Support Bolt | 81 Ft. lbs. |
| Rear Transaxle Mount-to-Cradle Bolts | 37 ft.lbs. |
| Stabilizer Bar Clamp-to-Frame Bolts | 37 ft.lbs. |
| Stabilizer Bar-to-Link Nut | 48 ft.lbs. |
| Stabilizer Link-to-Strut Nut | 48 ft.lbs. |
| Steering Gear-to-Frame Bolts | 81 ft.lbs. |
| Steering Knuckle-to-Strut | 133 ft.lbs. |
| Strut Shaft Nut | 55 ft.lbs. |
| Tie Rod End-to-Knuckle Nut | 37 ft.lbs. |
| Tie Rod End-to-Knuckle Tool | 30 ft.lbs. |
| Wheel Bearing/Hub-to- Knuckle Bolts | 96 ft.lbs. |
| Wheel Nuts | 92 ft.lbs. |