Rear Seat Replacement

Rear Seat Replacement

Removal Procedure




1. Remove the forward cover from the load floor to expose the rear seat fasteners.




2. Remove the rear seat forward fasteners.




3. Remove the rear seat fasteners.
4. Remove the rear seat assembly.

Installation Procedure




1. Position the rear seat to the vehicle.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the forward fasteners.

Tighten the fasteners to 20 Nm (15 lb ft).




3. Install the rear seat fasteners at the back of the seat.

Tighten the fasteners to 50 Nm (37 lb ft).




4. Position the load floor forward cover. Push down at the hook and loop locations to secure the load floor to the vehicle.