Radiator Cooling Fan: Service and Repair

ENGINE COOLING FAN

REMOVAL





1. Remove front fascia.
2. Drain coolant.
3. Disconnect fan motor from engine harness.





4. Unclip wire harness from fan assembly.





5. Unclip transmission cooler lines from fan assembly.





6. Remove battery box inside air duct.





7. Remove condenser splash shield.





8. Remove radiator inlet hose.





9. Remove radiator outlet hose.





10. Remove upper CRFM bracket assemblies.





11. Lift CRFM assembly from lower brackets and carefully move bottom of assembly rearward while tilting the top forward.





12. Remove fan assembly to radiator bolt.
13. Remove fan assembly.

INSTALLATION





1. Install fan assembly by guiding lower tabs of fan assembly into corresponding radiator hooks.





2. Install fan assembly to radiator bolts.
3. Install lower radiator pins into cradle brackets.





4. Install upper CRFM bracket assemblies.





5. Install radiator outside hose.
6. Position clamp at 5 o'clock.





7. Install radiator inlet hose.
8. Position clamp at 6 o'clock.





9. Install condenser splash shield.





10. Install battery box inlet air duct.





11. Clip transmission cooler lines to tan assembly.





12. Clip engine wire harness to fan assembly.





13. Connect fan motor to engine harness.
14. Install front fascia.
15. Fill cooling system.