63. Drive Belt Tensioner Installation

DRIVE BELT TENSIONER (UNIT REPAIR)

INSTALLATION





1. Install belt tensioner to engine
2. Install belt tensioner bolts
Torque:
Belt Tensioner Bolts: 40 N.m (30 ft. lbs.)
3. Install A/C compressor bracket
Torque:
A/C Compressor Bracket Bolt: 40 N.m (30 ft. lbs.)
4. Install A/C compressor
Torque:
A/C Compressor Bolts: 20 N.m (15 ft. lbs.)
5. Install generator
Torque:
Generator Mounting Bolts: 40 N.m (30 ft. lbs.)





6. Install belt to accessory drive pulleys.
7. Use a wrench on the center bolt of tensioner pulley and rotate downward to install belt to tensioner.
8. Tighten water pump pulley bolts.
Torque:
Water Pump Pulley Bolt: 8 N.m (71 inch lbs.)
9. Tighten drive belt idler pulley bolts.
Torque:
Drive Belt Idler Pulley Bolt: 20 N.m (15 ft. lbs.)