Heater Inlet Hose

HEATER INLET HOSE- L81

REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant.
3. Remove battery box/UHFB assembly.
4. Remove air outlet duct assembly.





5. Separate front heater inlet hose from rear hose by moving engine side clamp toward engine and separating hoses.
6. If removing rear heater inlet hose, remove clamp and hose from heater core inlet pipe.





7. If removing front heater inlet hose, remove clamp and hose from engine port.


INSTALLATION
1. If installing front heater inlet hose, install hose and clamp to engine port. Position clamp at 2 o'clock.





2. If installing rear heater inlet hose install hose and clamp to heater core inlet pipe. Position clamp at 9 o'clock.
3. Install front heater inlet hose to rear and install clamp at l o'clock position.
4. Install air outlet duct assembly.
5. Install battery box /UHFB assembly.
6. Connect negative battery cable.
Torque:
Battery Terminal Bolt: 17 Nm (13 ft. lbs.)
7. Fill cooling system.