Heater Outlet Hose

HEATER OUTLET HOSE- L81

REMOVAL





1. Disconnect negative battery cable.
2. Drain coolant.
3. Remove air outlet duct assembly.
4. Remove heater outlet hose clamp and hose from heater core outlet pipe.

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.

5. Raise vehicle
6. Remove clamp and hose from pump inlet.

INSTALLATION





1. Install heater outlet hose to auxiliary coolant pump inlet. Position clamp at 5 o'clock.
2. Lower vehicle.





3. Install heater outlet hose to heater core outlet pipe.
4. Install clamp at 9 o'clock position.
5. Connect negative battery cable.
Torque:
Battery Terminal Bolt: 17 Nm (13 ft. lbs.)
6. Fill cooling system.