Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSORREMOVAL
1. Ignition Off.
2. Disconnect Mass Airflow (MAF) harness connector.
3. Loosen air induction clamp from MAF sensor and remove air induction tube from sensor.
4. Remove MAF sensor fastener nuts and remove sensor.
INSTALLATION
1. Install MAF sensor to air cleaner box and install attachment nuts.
Torque:
Mass Airflow Sensor Nuts: 8 Nm (71 inch lbs.)
2. Install air induction tubing to MAF sensor and install air induction clamp.
3. Connect MAF sensor harness connector. Push connector in until the lock position is felt, then pull back to confirm engagement.