M/T - Clutch Master Cylinder Types/Identification
BULLETIN NO.: 02-T-54ISSUE DATE: July, 2002
CATEGORY TYPE: Transaxle - 11
CATEGORY: Clutch
CORPORATION NO.: 02-07-31-004
SUBJECT:
Clutch Master Cylinder Assembly Part Number Change
MODELS AFFECTED:
2002 Saturn VUE vehicles equipped with manual transaxles (MG3) built prior to VIN 2S833109.
PURPOSE:
The purpose of this bulletin is to provide service information about two designs of clutch master cylinders. When replacing the clutch master cylinder or clutch pedal, it is important that the correct parts be replaced to ensure proper operation.
The first design clutch pedal must not be used with the second design clutch master cylinder assembly.
Refer to the illustrations shown to determine which design is currently on the vehicle.
^ If the clutch master cylinder assembly must be replaced on a vehicle built with the first design, the clutch pedal must also be replaced.
IMPORTANT:
When replacing the first design clutch master cylinder assembly, the second design clutch pedal must be used.
^ If only the clutch pedal must be replaced, reuse the existing clutch master cylinder assembly and retaining clip.
Refer to the 2002 Saturn VUE Transaxle Service Manual for clutch pedal and master cylinder service procedures.
PARTS REQUIREMENTS
DISCLAIMER