14. Front Differential Transfer Drive Gear Assembly Installation

FRONT DIFFERENTIAL TRANSFER DRIVE GEAR ASSEMBLY INSTALLATION

^ TOOLS REQUIRED
- J 45053 Universal Clamp Press





IMPORTANT: Inspect roller bearing before installing front differential transfer drive gear assembly to be sure that all bearings are in correct position.

IMPORTANT: When front differential transfer drive gear is installed correctly, the front differential transfer drive gear and output gear will mesh evenly. If not, the front differential transfer drive gear did not clear all clutch plates or is not seated into back bearing.

1. Using Universal Clamp Press J45053, install front differential transfer drive gear assembly to transaxle case.





IMPORTANT: Install bearing with flange up.

2. Install front differential transfer drive gear thrust bearing washer (264).
3. Install front differential transfer drive gear thrust bearing (263).