Front Seat Back Cushion Finish Panel Replacement

Driver or Passenger Seat Back Cushion Finish Panel Replacement

Removal Procedure

1. Adjust the seat to full forward.






2. Fold the seat flat.
3. Remove the screws from the seat back panel.
4. Remove the seat back panel.

Installation Procedure






1. Install the panel to the seat back.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws to the seat back panel. Tighten the back panel screws to 2 Nm (18 lb in).
- Return the seat to the original position.