48. Cylinder Head Installation

CYLINDER HEAD (UNIT REPAIR) INSTALLATION

INSTALLATION

NOTICE: Do not use any sealing material.





1. Install cylinder head gasket to block.
2. Install cylinder head.

NOTICE: Always use new cylinder head bolts.

3. Lightly apply clean engine oil to threads and bottom side of flange of head bolt and allow oil to drain before installing.





4. Install and tighten cylinder head bolts in sequence.
Torque:
Cylinder Head Bolts: 30 Nm (22 ft. lbs.) + 155 degrees





5. Install front cylinder head bolts.
Torque:
Cylinder Head Front Chaincase Bolts: 35 Nm (26 ft. lbs.)