License Plate Lamp: Service and Repair

REAR LICENSE LAMP HOUSING

REMOVAL




1. Remove liftgate interior trim panel.
2. Remove rear wiper assembly.
3. Disconnect license lamp electrical connector.
4. Remove license lamp bezel to liftgate fasteners.
5. Remove license bezel housing.

INSTALLATION




1. Place license lamp bezel on liftgate.
2. Install license lamp bezel to liftgate fasteners.

Torque:
Licence Lamp Bezel to Liftgate Fasteners: 4 N.m (35 in-lbs)

3. Connect license lamp electrical connector.
4. Install rear wiper assembly.
5. Install liftgate interior trim panel.