14. Manual Shift Shaft and Parking System Components Removal

MANUAL SHIFT SHAFT AND PARKING SYSTEM COMPONENTS REMOVAL





1. Remove park pawl reaction pin, park pawl and spring.





2. Loosen manual shift shaft nut (46).
3. Remove manual shift shaft (40), nut (46), detent lever (45), park pawl actuator assembly (43), manual valve link (47), spring (48) and retainer (44).
4. Remove park pawl actuator assembly (43) from manual shaft detent lever (45).





IMPORTANT: Do not damage case bore during removal of manual shift shaft seal assembly.

5. Using a screwdriver, remove manual shift shaft seal assembly from transaxle case assembly. Discard seal assembly.