Deactivating - Radio In "Lock" or "- - - -" Mode (Code Known)
When the theft-deterrent feature is in the SEC (armed) mode, the radio can enter the locked state if the power is removed for greater than 20 seconds or an incorrect code entry is attempted three times. An error message is displayed after every wrong entry.When the radio is in the LOCK (locked) mode, "LOCK" is displayed and all radio functions are disabled.
Before another attempt at the correct code can be made, the radio must be On and the display must show "LOCK" for an hour. After an hour, "- - - -" will be displayed and the correct code may be entered using the following steps.
1. Turn the ignition On.
2. Press the power button on the radio. The display will show "- - - -".
3. Enter the four digit code by using the
3.1 Press the down arrow side of
3.2 Press the up arrow side of
3.3 Press the down arrow side of
3.4 Press the up arrow side of
4. Press the AM/FM button after entering the four digit code. If the correct code has been entered, the radio will return to the SEC (armed) mode and normal operation will return. If the wrong code is entered, the display will show an error message and display "- - - -" indicating another attempt at the correct code can be made.