Cross-Car Beam

CROSS-CAR BEAM

REMOVAL




1. Remove all related panels and components.
2. Restore as much of the damage as possible to factory specifications.
3. Remove six fasteners that hold the cross-car beam to the hinge pillar inner.
4. Remove the damaged cross-car beam.

INSTALLATION

1. Position the cross-car beam.
2. Install six fasteners that hold the cross-car beam to the hinge pillar inner.

Torque:
Cross-Car Beam-to-Hinge Pillar
Fastener: 25 N.m (18 ft. lbs.)