Instrument Panel (IP) - Outer Trim Cover Replacement - Right

Instrument Panel (I/P) Outer Trim Cover Replacement - Right

Removal Procedure





1. Open the I/P compartment door.
2. Remove the push-pins from the outer trim panel cover by pushing the center pin with an awl.
3. Pull the trim panel to disengage the trim clips.




4. Disconnect the electrical connector from the outer panel door jamb switch.
5. Remove the right outer trim panel.



Installation Procedure





1. Connect the door jamb electrical connector
2. Position the outer trim panel.




3. Push to install the outer trim panel.
4. Install the push-pins to the outer trim panel.
5. Close the I/P compartment door.