Glass Replacement - Mirror

Glass Replacement - Mirror

Removal Procedure
Caution: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.





1. Cover the mirror lens with tape.
2. Rotate mirror lens to expose outer edge.
3. Insert a large flat blade screwdriver in to slot between mirror lens and mounting base.
4. Gently pry out on the mirror lens until the lens snaps off base.
5. Remove the lens.



Installation Procedure





1. Align new mirror lens with mounting base.
2. Install the mirror face to the mirror motor with the palm of the hand on the center of the glass, pressing in until fully seated.
3. Inspect the mirror for proper operation.