Engine Removal From Frame

ENGINE REMOVAL FROM FRAME





The transaxle remains mounted firmly in the cradle during removal.
1. With engine/transaxle on table, attach engine lift hoist to engine lift hooks.





2. Remove starter.
3. Remove torque converter to flywheel bolts.
4. Remove transaxle to engine bolts.
5. Remove Power Takeoff Unit (PTU) brackets to engine bolts.
6. Disconnect transaxle electrical connectors.





NOTICE: There are different length bolts and bolt locations that are not used (lower engine to transaxle bolt holes) on each side of engine.

7. Remove transaxle bolts.

IMPORTANT: Remove transaxle bolts.

8. Disconnect PRNDL switch electrical connector.
9. Separate engine from transaxle.