Rear Wiper Module

REMOVAL




1. Remove rear wiper arm finish cap to expose to wiper arm fastener.
2. Remove rear wiper arm fastener.
3. Lift rear wiper arm assembly away from rear window and remove wiper arm from pivot shaft.




4. Remove liftgate trim panel.




5. Remove rear wiper module fasteners and slide pivot shaft out of rear window grommet.
6. Disconnect electrical connector.

INSTALLATION
1. Connect electrical connector.
2. Install rear wiper module through rear window grommet and install fasteners.

Torque:
Rear Wiper Module: 7 N.m (62 in-lbs)

3. Install liftgate trim panel.




4. Position rear wiper blade assembly on the first rear window defogger grid line above the blackout strip as shown in illustration.
5. Install rear wiper arm nut and tighten.

Torque:
Rear Wiper Arm Nut: 30 N.m (21 ft-lbs)

6. Install rear wiper arm finish cap.