Front Wheel Speed Sensor

FRONT WHEEL SPEED SENSOR

REMOVAL

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST.TO HELP AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.

1. Raise vehicle on hoist.
2. Remove front brake rotor.





3. Disconnect wheel speed sensor electrical connector.
4. Remove wheel speed sensor bolt.





5. Remove wheel speed sensor.

INSTALLATION
1. Position wheel speed sensor into wheel bearing/hub assembly and install fastener.
Torque:
Wheel Speed Sensor: 8 Nm (71 inch lbs.)

2. Connect wheel speed sensor electrical connector.
3. Install front brake rotor.
4. Lower vehicle from hoist.