Battery Replacement

REMOVAL

IMPORTANT: Record all preset radio stations.

1. Ignition Off.
2. Remove battery cooling box screws and remove battery cover.
3. Disconnect negative battery cable.
4. Disconnect positive battery cable.

CAUTION: DO NOT TIP BATTERY OVER 45° ANGLE OR ACID COULD SPILL.




5. Loosen battery hold down bolt and remove battery.

INSTALLATION

CAUTION: DO NOT TIP BATTERY OVER 45° ANGLE OR ACID COULD SPILL.

1. Install battery and tighten battery hold down bolt.

Torque:
Battery Hold Down Bolt: 15 N.m (11 ft-lbs)

2. Connect positive battery cable to battery.

Torque:
Battery Terminal Bolts: 17 N.m (13 ft-lbs)

3. Connect negative battery cable to battery.

Torque:
Battery Terminal Bolts: 17 N.m (13 ft-lbs)

4. Install battery cooling box cover and tighten screws.

Torque:
Battery Cooling Cover Box Screws: 2 N.m (18 in-lbs)