15. Manual Shift Detent Lever and Park Pawl Lock Installation

MANUAL SHIFT DETENT LEVER AND PARK PAWL LOCK INSTALLATION





1. Install park pawl pin spring (704), park pawl pin spring sleeve guide (705), and bolt (706).
Torque: Park Pawl Bolt: 10 N.m (89 inch lbs.)





2. Install park pawl spring pin (703).





3. Install park pawl actuator bracket (708) and park pawl (702).





4. Install park pawl shaft (700) and spring (701).





5. Install manual shift detent spring assembly (711).





6. Install and hand tighten the 14 mm detent spring bolt (712) and the 16.7 mm. detent spring bolt (715) and washers (716).
Torque: Detent Spring Bolt (14 mm): 6 N.m (53 inch lbs.)
Torque: Detent Spring Bolt (16.7 mm): 10 N.m (89 inch lbs.)





7. Install park pawl actuator rod (709).





8. Install manual shift detent lever assembly (710).

IMPORTANT: The park pawl actuator rod (709) must be installed with the rod between the case and the manual shift detent lever.

9. Connect park pawl actuator rod (708) to manual shift detent lever assembly (710).





10. Using a screwdriver, lift detent spring and rotate manual shift lever into position.