Manual Downshifts

Shifts between all forward gears are controlled by the shift solenoids, not the manual valve. "Manual" downshifts are accomplished by the TCM, based on the Transaxle Range Switch input.

Manual 5-3 Downshift
1. Place the gear selector in the Drive position.
2. Accelerate the vehicle to 72 km/h (45 mph) in 5th gear.
3. Release the accelerator pedal while moving gear selector to Intermediate.
4. Verify the following:
^ The TCC releases
^ The transaxle downshifts immediately to 3rd gear
^ The engine slows the vehicle

Manual 5-2 Downshift
1. Place the gear selector in the Drive position.
2. Accelerate the vehicle to 72 km/h (45 mph) in 5th gear.
3. Release accelerator pedal while moving gear selector to Low.
4. Verify the following:
^ The TCC releases
^ The transmission downshifts immediately to 2nd gear.
^ The engine slows the vehicle.