Window Run Channel Replacement - Rear Door

Window Run Channel Replacement - Rear Door

Removal Procedure

1. Remove the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .
2. Remove the rear door applique. Refer to Door Frame Applique Replacement - Rear () .
3. Remove the rear door window weatherstrip run channel assembly. Refer to Window Weatherstrip Run Channel Assembly Replacement - Rear (Window Weatherstrip Run Channel Assembly Replacement - Rear) .
4. Remove the rear door outer panel. Refer to Outer Door Panel Replacement Rear - Bolt On () .
5. Remove the rear door sound insulator. Refer to Sound Insulator Replacement - Rear Door (Sound Insulator Replacement - Rear Door) .




6. Remove the rear door window run channel and fixed glass assembly.

* Remove the lower bolt from the fixed glass post.
* Disengage the fixed glass post upper clip from the door frame by using a small screwdriver to press up on the clip.
* Depress the mushroom retainers at the top ends of the metal glass run channels.
* Remove the seal leg from the front metal glass run channel.
* Starting from the front corner of the door, remove the seal from the door header flange.
* Remove the seal and fixed glass assembly from the door.




Installation Procedure





1. Install the window run channel seal and fixed glass assembly.

* Place the seal and fixed glass assembly into the door frame.
* Place the seal assembly on the door header.
* Install the fixed glass post upper clip to the door frame.
* Install the front seal leg to the metal glass run channel.
* Secure the mushroom retainers at the top ends of the metal glass run channels.
* Install the seal to the door header flange, starting from the front corner.

Notice: Refer to Fastener Notice in Cautions and Notices.

* Install the lower fixed glass post bolt.

Tighten the bolt to 10 N.m(89 lb in).


2. Install the rear door sound insulator. Refer to Sound Insulator Replacement - Rear Door (Sound Insulator Replacement - Rear Door) .
3. Install the rear door outer panel. Refer to Outer Door Panel Replacement Rear - Bolt On () .
4. Install the rear door window weatherstrip run channel assembly. Refer to Window Weatherstrip Run Channel Assembly Replacement - Rear (Window Weatherstrip Run Channel Assembly Replacement - Rear) .
5. Install the rear door applique. Refer to Door Frame Applique Replacement - Rear () .
6. Install the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .