Seat Replacement - Rear

Seat Replacement - Rear

Removal Procedure





1. Remove the forward cover from the load floor to expose the rear seat fasteners.




2. Remove the rear seat forward fasteners.




3. Remove the rear seat fasteners.
4. Remove the rear seat assembly.



Installation Procedure





1. Position the rear seat to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the forward fasteners.

Tighten the fasteners to 20 N.m (15 lb ft).





3. Install the rear seat fasteners at the back of the seat.

Tighten the fasteners to 50 N.m (37 lb ft).





4. Position the load floor forward cover. Push down at the hook and loop locations to secure the load floor to the vehicle.