Cylinder Head Assembly

Camshaft Bearing Cap Bolt 10 Nm (89 inch lbs.)

Camshaft Sprocket Bolt
First Pass 85 Nm (63 ft. lbs.)
Final Pass 30°





Cylinder Head Bolt
First Pass 30 Nm (22 ft. lbs.)
Final Pass 155°

Note: Use New Cylinder Head Bolts

Cylinder Head
Surface Flatness - Block Deck - Transverse 0.030 mm (0.0012 inch)
Surface Flatness - Block Deck - Longitude 0.050 mm (0.002 inch)
Surface Flatness - Block Deck- Overall 0.1 mm (0.004 inch)
Valve Guide Bore - Exhaust 6.000-6.012 mm (0.2362-0 2367 inch)
Valve Guide Bore - Intake 6.000-6.012 mm (0.2362-0.2367 inch)
Valve Lifter Bore Diameter - Stationary Lash Adjusters 12.013-12.037 mm (0.4730-0 4739 inch)

Intake Camshaft Rear Cap Bolt 25 Nm (18 ft. lbs.)
Intake Manifold to Cylinder Head Bolt 10 Nm (89 inch lbs.)
Intake Manifold to Cylinder Head Nut 10 Nm (89 inch lbs.)
Intake Manifold to Cylinder Head Stud 6 Nm (53 inch lbs.)

Exhaust Manifold to Cylinder Head Nut 14 Nm (124 inch lbs.)
Exhaust Manifold to Cylinder Head Stud 10 Nm (89 inch lbs.)
Exhaust Manifold Pipe Flange Stud 16 Nm (12 ft. lbs.)