24. Manual Shift Shaft and Parking System Components Installation

Manual Shift Shaft and Parking System Components Installation

- Tools Required
- J 44969 Manual Shift Shaft Seal Installer
- J 45190 Manual Shift Shaft Socket





1. Partially insert the manual shift shaft (40) through the case hole.
2. Install the park pawl actuator assembly (43) on the manual shaft detent lever (45).
3. Install the manual shift shaft retainer (44), detent lever (45), manual valve link (47) and spring (48), and nut (46) on the manual shift shaft (40).
4. Fully install the manual shift shaft.






Notice: Refer to Fastener Notice in Cautions and Notices.

5. Using the J 45190 and a wrench, tighten the manual shift shaft nut.
- Tighten the nut to 30 Nm (22 ft. lbs.).





6. Using the J 44969 and a hammer, install a NEW manual shift shaft seal assembly into the transmission case assembly.





7. Install the park pawl reaction pin, park pawl and spring.