36. Front Wheel Drive Shaft Oil Seal Removal

Front Wheel Drive Shaft Oil Seal Removal

- Tools Required
- J 45000 Seal Remover






Notice: Use care when removing the seal in order to prevent damage to the torque converter and differential housing assembly.

Important: There are 2 front wheel drive shaft oil seals. The right seal is located on the torque converter and differential housing assembly. The left seal is located on the transmission case assembly.

Important: Discard the seals after removal. Do not reuse the seals.

Important: Perform Step 1 for 2WD transmissions. Perform Step 2 for F4WD transmissions.

1. Using the J 45000, remove the oil seal from the torque converter and differential housing assembly.





2. Remove the O-ring seal from the torque converter and differential housing assembly.





3. Using the J 45000, remove the oil seal from the transmission case assembly.