Component Tests and General Diagnostics

Test Description

The numbers below refer to the step numbers on the diagnostic table.
2. The lack of communication may be caused by a partial or a total malfunction of the circuit containing the class 2 serial data. The specified procedure will determine the particular condition.
3. The presence of DTCs which begin with a U indicate some other module is not communicating. The specified procedure will collect all the available information before tests are performed.
5. Tests if a malfunction exists in the EPS system.
6. Tests if the steering column shaft is bent, twisted or damaged due to a previous collision and or air bag deployment.






Diagnostic System Check - Power Steering System