124. 3RD and 4TH Clutch Fluid Pressure Switch Installation

3rd and 4th Clutch Fluid Pressure Switch Installation






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Using a NEW clutch fluid pressure switch sealing washer (4), install the 3rd clutch fluid pressure switch (25) into the transmission case housing (31) and tighten the switch on the metal part, not the plastic part.
- Tighten the pressure switch to 20 Nm (14 ft. lbs.).
2. Using a NEW clutch fluid pressure switch sealing washer (4), install the 4th clutch fluid pressure switch (5) into the transmission case housing (31) and tighten the switch on the metal part, not the plastic part.
- Tighten the pressure switch to 20 Nm (14 ft. lbs.).