53. 1ST Clutch Hub Replacement

1st Clutch Hub Replacement

- Tools Required
- DT 46427 Driver
- DT 46516 Driver
- EN 46342 Driver Handle





1. Using EN 46342 (1) and DT 46516 (2) and a hydraulic press, remove the coast clutch hub (724) from the 1st drive gear (726).
2. Remove the 1st clutch hub and coast sprag assembly (725) from the 1st drive gear (726).
3. Install the new 1st clutch hub and coast sprag assembly (725) in the 1st gear.





4. Using EN 46342 (1) and DT 46516 (2) and a hydraulic press, install the 1st and coast clutch hub (724) and the 1st drive gear (726).