56. 1ST, Coast Clutch Assemble

1st, Coast Clutch Assemble

- Tools Required
- J 21420-2 Plate
- J 23327 Spring Compressor
- J 28585 Snap Ring Remover
- J 45124 Adjustable Bridge
Note these items during assembly:






Caution: When you use compressed air in order to clear fluid passages and to dry parts, always aim the air pressure away from face and eyes. Always wear adequate eye protection in order to avoid injury from dirt and debris that may adhere to parts.

- Clean all parts thoroughly and dry then) with compressed air.
- Use compressed air to clear all passages,
- Apply automatic transmission fluid to all O-ring seals before assembly.
- Soak all clutch fiber plates thoroughly in automatic transmission fluid for a minimum of 30 minutes.