66. Engine Flywheel Installation

Engine Flywheel Installation

^ Tools Required
- J 38122-A Harmonic Balancer Holder
- J 45059 Angle Meter





1. Install the flywheel.
2. Install the new bolts.

Notice: Refer to Fastener Notice in Service Precautions.

3. Holding the crankshaft damper with the J 38122-A, tighten the bolts evenly. Using the J 45059, tighten the bolts to 53 Nm (39 ft. lbs.), plus 25° using the J 45059.