Procedures

LUGGAGE CARRIER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the roof front panel applique.
2. Remove the roof rear panel applique.




3. Open the lift gate and support at a 45 degree angle, and remove the rear luggage carrier screws.




4. Remove the remaining screws from the luggage carrier.
5. Remove the luggage carrier from the roof.

INSTALLATION PROCEDURE




1. Position the front and rear sections of the luggage carrier to the roof.
2. Install the luggage carrier top screws.

NOTE: Refer to Fastener Note in Service Precautions.

Tighten the screws to 7 N.m (62 lb in).




3. Open the lift gate and support at a 45 degree angle, and install the rear mounting screws to the luggage carrier.

Tighten the screws to 2.3 N.m (20 lb in).

4. Remove the roof rear panel applique.
5. Remove the roof front panel applique.