Cylinder Head Replacement - Right

CYLINDER HEAD REPLACEMENT - RIGHT SIDE

Removal Procedure






1. Remove the right rocker cover (2).






2. Remove the right rocker arm and shaft assembly.
3. Remove the timing belt.
4. Remove the coolant bridge.
5. Disconnect the right bank oxygen sensors.
6. Remove the right cylinder head.

Installation Procedure

1. Install the right cylinder head.
2. Connect the right bank oxygen sensors.
3. Install the coolant bridge.
4. Install the timing belt.






5. Install the right rocker arm and shaft assembly.
6. Adjust the valve lash.






7. Install the right rocker cover (2).