Timing Belt: Service and Repair

Timing Belt Replacement

Removal Procedure

1. Remove the timing belt cover. Service and Repair





2. Remove the timing belt (235). Overhaul

Installation Procedure

Important: The Powertrain Control Module (PCM) has to perform the idle learn procedure under the following conditions:
^ Any operation or repair involving the crankshaft, the crankshaft position (CKP) sensor, or the CKP sensor-to-reluctor wheel gap relationship
^ Timing belt removal or replacement
^ PCM replacement
^ Throttle body removal or replacement
^ Engine assembly replacement





1. Install the timing belt (235). Overhaul
2. Install the timing belt cover. Service and Repair
3. Perform the idle learn procedure.