Compressor Clutch Does Not Engage

HVAC COMPRESSOR CLUTCH DOES NOT ENGAGE

TEST DESCRIPTION

Steps 1-8:

Steps 9-22:

Steps 23-34:

The numbers below refer to the step numbers on the diagnostic table.
2. The A/C compressor relay output is disabled if the engine coolant temperature is above 96°C (205°F).
3. Place the mode switch in any position except OFF, and place the air temperature control switch in a cold setting. Use the bi-level mode for consistent testing of the A/C system operation.
6. The HVAC control module is inoperative if the module does not respond to any operator control requests.