Engine - Revised Engine Mount Sealing Procedure
Bulletin No.: 04-06-01-002Date: January 26, 2004
SERVICE MANUAL UPDATE
Subject:
Service Manual Update - Add Sealant to the Right Engine Mount Bracket Lower Bolt
Models:
2004 Saturn VUE Vehicles
with 3.5L Engine VIN 4 - RPO L66)
Attention:
Technician
Purpose
The purpose of this bulletin is to communicate service information for applying sealant to engine mount bracket lower bolt to eliminate the potential for any oil leaks.
Procedure
Engine Mount Bracket-Right Installation
Note:
Refer to "Fastener Notice" in the Cautions and Notice section of the 2004 Saturn VUE Engine Service Manual.
1. Position the engine mount bracket to the engine.
Important:
Three bolts retain the mount bracket to the engine. Apply sealant to the threads of the lower bolt only.
2. Apply sealant, Saturn P/N 21485277 (GM P/N 12345382, Canada P/N 10953489), or equivalent, to the engine mount bracket lower bolt only and install the engine mount bracket to engine bolts.
Tighten
Tighten the engine bolts to 44 N.m (33 ft-lbs).
3. Install the right engine mount. Refer to the "Engine Mount Replacement - Right" procedure located in the 2004 Saturn VUE Engine Service Manual.
The eSI website will be updated immediately and future Service Stall System SI CD releases will include this and other Service Manual updates.
Disclaimer