16. Man Shaft Detent Lever & Park Pawl Actuator W/Linkage Removal

Manual Shaft Detent Lever and Park Pawl Actuator with Linkage Assembly Removal





1. Remove the manual shift shaft detent roller spring (936) from the manual shift shaft detent lever assembly (932) and the manual shift shaft detent roller assembly (935).
2. Remove the manual shaft detent lever and park pawl actuator with linkage assembly (932) from the torque converter housing bore (150) and the park pawl actuator shaft front bearing (134), which is a press-fit bearing, located in the torque converter housing (150).