Differential Housing Support Bushing Replacement

Differential Housing Support Bushing Replacement

- Tool Required
- J 44866 Support Bushing Remover/Installer






Important: Remove the bushing only if damaged or worn out.

Important: Use the high pressure lube supplied with the tool.

1. Install J 44866. Tighten the nuts to force out the bushing.






Important: The bushing has 2 slots molded into the rubber section. The slots are used to control vibration and must be installed in the following positions:
- 6-Cylinder Vehicles - Align the slots in the 3 o'clock and 9 o'clock position (2).
- 6-Cylinder Vehicles - Align the slots in the 6 o'clock and 12 o'clock position (1).

2. Install J 44866. Tighten the nuts to force the bushing in.