Assembly Inspection

Transfer Case Assembly Inspection

- Tools Required
- SA9179NE Dial Indicator






Important: The inspections below are to be used as a basic functional test of the transfer case assembly. Complete disassembly and inspection of the internal components may be required to identify worn bearings, a worn gear set or other internal damage.

1. Use the SA9179NE in order to measure the output shaft/input gear backlash.
Specification 0.06-0.16 mm (0.0024-0.0063 inch)





2. Secure the case in a bench vise with soft jaws.
3. Measure the output shaft/input gear rotating torque.
Specification 3.20-4.16 mm (28.2-34.3 inch lbs.)
4. If the measurements are not within specifications, replace the transfer case as required.